Certifications
- Home
- Certifications
FR Cables — Certified for Safety. Trusted for Performance.
Certifications reflect our unwavering commitment to quality, safety, and compliance. FR Cables products are manufactured and tested in accordance with recognized international standards to ensure consistent performance and long-term reliability.
Applicable Standards
BS 7211:
Electric Cable – Thermosetting Insulated, Non-armored Cable for voltage up to and including 450/750 V, for
electric Power, lighting and internal wiring and having low emission of smoke and corrosive gases when affected
by fire.
BS 7846:
Electric Cables – 600/1000 V armored fire resistant cable having thermosetting insulation and low emission of
smoke and corrosive gases when affected by fire.
BS 6724:
Electric Cable – Thermosetting insulated armored cables for voltage of 600/1000 V and 1900/3300 V having low
emission of smoke and corrosive gases when affected by fire.
BS 7629:
Electric Cables – specifications for 300/500 V fire resistant screened cables having low emission of smoke and
corrosive gases when affected by fire.
IEC 60502-1
Power Cables with extended insulation & their accessories for rated voltage from 1KV (U = 1.2KV) and
m
3KV (U = 3.6KV)
m
BS 6360:
Specifications for conductors in insulated cables cords.
IEC 60228:
Conductors of insulated cables.
BS 6387:
Specification for performance requirements for cables required to maintain circuit integrity under fire conditions.
IEC 60331-21:
Test for electric cables under fire condition circuit integrity
Part 2:- Procedures & requirement cable of rated voltage upto & including 0.6/1KV.
BS 4066-1=IEC 332-1
Test on electric cables under fire conditions.
Part 1: method of test on a single vertical insulated wire or cable
BS 4066-3 = IEC 332-3:
Test on electric cables under fire condition.
Part 3: Test on bunched wire or cables.
BS 6425-1, IEC 60754-1:
Method of test for gases evolved during combustion of electric cables.
Part 1:- Method for determination of amount of halogen acid gas evolved during combustion of polymeric
materials for cables.
BS 6425-2, IEC 60754-2:
Test on gases evolved during the combustion of material from cables.
Part 2:- Determination of degree of acidity (corrosivity) of gases by measuring pH and conductivity.
IEC 61034-1, BS7622-1:
Measurement of smoke density of cables burning defined conditions
Part-1:- Test Apparatus
IEC 61034-2, BS7622-2:
Measurement of smoke density of cables burning under defined conditions
Part-2:- Test Procedure & Requirements.
UL 94:
Test for flammability of plastic materials for part in device and appliances.
ASTM D2863:
Standard test method for measuring the minimum oxygen concentration to support candle like combustion of
plastic.
ASTM D792:
Standard test methods for density and specific gravity (relative gravity) of plastic by displacement.
ASTM D662:
Standard test method for specific optical density of smoke generated by solid materials.
ASTM D638:
Standard test method for tensile properties of plastics.
